These are assembly instructions for our three-tier cartridge display stand that is available from our online shop. The stand is designed to house all of the official Atari Lynx cartridges but will work with many homebrew carts as well (especially the modern curved lip style ones).
The display stand comes unassembled. There are 8 parts to it - 2 sides, 3 fronts with the Lynx logo and 3 backs with the Atari Gamer website address printed on it.
First take the front and the side pieces. Place one of the side pieces on a hard, flat surface and push in the matching side of the front piece into it. Repeat with the second front piece. Note that it will be a very snug fit, but it will go in, just take it slowly and apply force straight down so not to snap anything. With one side pushed in, place the second side flat and push the other side of the front piece in. It should be easier to get the second side to go in as you can push down on the first side.
Slide the back sections into the grooves, and you're done! There's nothing locking the back section in, but for display purposes there doesn't need to be. You may see your display stand slightly misaligned after first assembling it, just squeeze it into the right shape until it settles.