This is an assembly guide for our 2D Pixelated Lynx Model kit that you purchase from our shop.

Kit Contents🕸

The kit comes with two 'sheets' of parts. There is a white and red sheet. As typical of all plastic model kits, the parts on each sheet are flat and need to be cut away from the sheet first.

Step 1🕸

Use side cutters to cut away each of the parts. They are attached to each sheet using thin strips of plastic.

Step 2🕸

Pick whichever side of the white console base unit you want to be the front, then slide the red centre screen section into the grooves. You may need to apply some pressure or trim the tongues on the red part to fit properly.

Follow the same process for the two red side parts.

Step 3🕸

Align the slots on the bottom of the white base unit and the two stands, slide them into one-another. The Lynx kit will now be able to stand on its own.